Pegasus II is here! The new Pegasus II SBC (single board computer) is now shipping. Pegasus II is a FLEXSTAR-exclusive design optimized for use in storage device test systems. Like the original Pegasus SBC, the highly-integrated Pegasus II incorporates unique features such as built-in IDE/ATA tri-state circuitry and a narrow profile to facilitate high DUT/sq. foot tester design. A key new feature is its 64-bit, 66MHz PCI-X 2.2 compliant expansion slot. PCI-X gives the Pegasus II the bandwidth needed to support today’s fastest interfaces and those of tomorrow at full speed. Additional features include built-in SATA 1.0, ATA/UDMA100 and USB 2.0 controllers, plus lightning-fast gigabit Ethernet to reduce the time required for large multi-port testers to come fully on line.
FlexStar Technology has an impressive line of power margining cards including the new Network Power Margin II (NPM2). The NPM2 consists of a motherboard that can hold up to four compact DC-to-DC converter modules, providing up to four independently programmable voltage outputs. Each output can be programmed from 0V to 15V in 7.5mV increments.
We offer a wide range of test fixtures to accommodate a wide variety of storage devices. Through the use of swappable “sub-adapters,” FlexStar’s versatile 3.5” “Vibration” fixture accommodates virtually all types of 2.5” and 3.5” HDDs. The fixture can even accommodate 1” CF-type drives by using a drop-in adapter. The Vibration fixture holds 3.5” drives firmly by the casting bosses eliminating induced off-track errors, and its drawer-like actuation ensures clean, non-damaging connector insertion and removal.
FlexStar also offers fixtures for testing half-height and slim ODDs, both horizontally and in a vertical orientation. Exciting new additions to the test fixture line up include injection-molded fixtures for 1” and 1.8” CE-ATA and Flex-ATA drives, and for 2.5” SATA drives as well. We can also do custom designs if we don’t already have a test fixture that meets your needs,
We offer a wide range of test fixtures to accommodate a wide variety of storage devices. Through the use of swappable “sub-adapters,” FlexStar’s versatile 3.5” “Vibration” fixture accommodates virtually all types of 2.5” and 3.5” HDDs. The fixture can even accommodate 1” CF-type drives by using a drop-in adapter. The Vibration fixture holds 3.5” drives firmly by the casting bosses eliminating induced off-track errors, and its drawer-like actuation ensures clean, non-damaging connector insertion and removal.
FlexStar also offers fixtures for testing half-height and slim ODDs, both horizontally and in a vertical orientation. Exciting new additions to the test fixture line up include injection-molded fixtures for 1” and 1.8” CE-ATA and Flex-ATA drives, and for 2.5” SATA drives as well. We can also do custom designs if we don’t already have a test fixture that meets your needs,
We offer a wide range of test fixtures to accommodate a wide variety of storage devices. Through the use of swappable “sub-adapters,” FlexStar’s versatile 3.5” “Vibration” fixture accommodates virtually all types of 2.5” and 3.5” HDDs. The fixture can even accommodate 1” CF-type drives by using a drop-in adapter. The Vibration fixture holds 3.5” drives firmly by the casting bosses eliminating induced off-track errors, and its drawer-like actuation ensures clean, non-damaging connector insertion and removal.
FlexStar also offers fixtures for testing half-height and slim ODDs, both horizontally and in a vertical orientation. Exciting new additions to the test fixture line up include injection-molded fixtures for 1” and 1.8” CE-ATA and Flex-ATA drives, and for 2.5” SATA drives as well. We can also do custom designs if we don’t already have a test fixture that meets your needs,
We offer a wide range of test fixtures to accommodate a wide variety of storage devices. Through the use of swappable “sub-adapters,” FlexStar’s versatile 3.5” “Vibration” fixture accommodates virtually all types of 2.5” and 3.5” HDDs. The fixture can even accommodate 1” CF-type drives by using a drop-in adapter. The Vibration fixture holds 3.5” drives firmly by the casting bosses eliminating induced off-track errors, and its drawer-like actuation ensures clean, non-damaging connector insertion and removal.
FlexStar also offers fixtures for testing half-height and slim ODDs, both horizontally and in a vertical orientation. Exciting new additions to the test fixture line up include injection-molded fixtures for 1” and 1.8” CE-ATA and Flex-ATA drives, and for 2.5” SATA drives as well. We can also do custom designs if we don’t already have a test fixture that meets your needs,
