- High bandwidth design for maximum interface speeds
- Supports all interfaces and storage device types
- Consistent and repeatable testing
The Flexstar single board computer is at the heart of all
Flexstar test systems. Now in its fifth generation, the
high performance and flexibility enable maximum
throughput, leading to faster testing and quicker problem
determination and resolution.
The 64-bit, 66MHz PCI-X 2.2 compliant expansion slot
gives the single board computer the bandwidth to run
the fastest disk drives at their maximum data rates and
still have headroom to manage future performance
increases.
In addition to future-proofing your test system, earlier
Flexstar test systems can be upgraded with the single
board computer, extending the test capabilities and
protecting your investment.
The compact form-factor combined with high bandwidth
allows the highest-density test chambers for small form-
factor drives. Onboard gigabit Ethernet ensures fast
system startup of large multi-port chambers and remote
management.
The Flexstar single board computer enables flexible,
accurate and repeatable testing for any storage device.
Product Specifications
General
- CPU: Socket 478 supports Celeron, Celeron D and Pentium-4 CPUs up to 2.5 GHz
- Chipset: Intel 852GME North Bridge + 6300ESB South Bridge, includes 1MB VGA controller
- BIOS: 4Mbit AWARD flash BIOS supports Plug & Play, APM, ACPI, APIC and remote boot
- DRAM: One 184-pin DIMM slot supports up to 1GB of DDR 266/333 memory
- PCI-X Expansion Slot: PCI-X 2.2 compatible, supports up to two 3.3V adapters
- SATA: On-board SATA 1.5Gbps controller
- IDE: On-board ATA/UDMA100 controller includes built-in tri-state circuitry
- Floppy Disk Interface included
- USB 2.0: 2 ports
- Ethernet: 10/100/1000 Base-T PCI Ethernet controller
- I/O: One parallel port and two serial ports (RS232)
Key Features
- 64-bit, 66MHz PCI-X 2.2 compliant expansion slot supports two 3.3V adapter cards with available 2-slot riser
- Investment protection: field replacement for earlier models (Pegasus SBC)
- Single 15V – 18V power input.
- Built-in IDE/ATA tri-state circuitry with external control option
- Narrow profile facilitates highest density testing
- Developed to work with industry-leading multi-tasking, multi-threaded Flexstar test software as well as vendor-specified test software